bluetooth modul

Willkommen bei unserem bluetooth modul Test / Vergleich.

Wir haben für Sie die besten bluetooth modul Produkte in dieser Kategorie aufgelistet:

Viel Spaß beim Stöbern 🙂

Bestseller Nr. 1
Aukru HC-06 Drahtlose 4 Pins Bluetooth RF Transceiver Serial Modul mit 4 set kabel für Arduino
23 Bewertungen
Aukru HC-06 Drahtlose 4 Pins Bluetooth RF Transceiver Serial Modul mit 4 set kabel für Arduino*
  • TXD: the sending end , generally expressed as their transmitter, normal communication must be connected to RXD another device .
  • RXD: the receiving end, generally expressed as their receiving end, the normal communication TXD must be connected to another device. Itself when normal communication TXD RXD devices connected forever !
  • Collected spontaneously : RXD when normal communication to other devices connected TXD, so if you want to receive data transmitted by its own name suggests , it is their own to receive data transmitted , which is directly connected to its own TXD RXD, used to send and receive test itself is normal, is the quickest and easiest test method, when a problem first do the test to determine whether a product failure. Also known as the loopback test .
  • 1. the core module using the HC-06, interface includes VCC, GND,TXD,RXD, aside LED status output pin, the microcontroller can be connected via Bluetooth to determine whether the pin state, KEY pin of the slave invalid 2. led indicate Bluetooth connection status, flashes to indicate there is no Bluetooth connection, Steady Bluetooth port is connected and turned on 3.bottom 3.3V LDO, the input voltage 3.6~6V, when unpaired current of 30mA, the pairing of 10mA, the input voltage must not exceed 7V!
  • 4.the interface level is 3.3V, you can directly connect a variety of SCM(51, AVR, PIC, ARM,MSP430 etc. ), 5V microcontroller can also be connected, not through without MAX232! 5.open to 10m effective distance of over 10m are possible, but don't make this connection to ensure the quality of distance 6. after the pair when using full-duplex serial port,without having to know any Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format,not support other formats.
Bestseller Nr. 2
KKmoon USB-DC 5V Bluetooth 2.1 Audio-Receiver Board Drahtlose Stereo Musik-Modul DIY AMP Board Electronic mit TF-Karten-Slot
12 Bewertungen
KKmoon USB-DC 5V Bluetooth 2.1 Audio-Receiver Board Drahtlose Stereo Musik-Modul DIY AMP Board Electronic mit TF-Karten-Slot*
  • Eine perfekte Bluetooth-audio-Receiver Board für den Einsatz.
  • Eingebaute 3,5 mm audio-Buchse für audio-Ausgang.
  • Bluetooth 2.1 erhalten, können mit dem Ohrhörer anschließen und kann auch für Endstufe verwendet werden.
  • USB-Schnittstelle, angetrieben durch DC 5V; mit TF-Karten-Slot.Mit 5 Tasten zur Einstellung, komfortable und einfache Bedienung.
  • Die Übertragungsreichweite könnte bis zu 10 m (geschirmt Signale).
Bestseller Nr. 3
KKmoon TDA7492 Wireless Bluetooth 4.0 Digital Stereo Endstufe Board Modul/ 50W + 50W Dual Kanal Audio Receiver/ Audioempfänger Endverstärker Brett
37 Bewertungen
KKmoon TDA7492 Wireless Bluetooth 4.0 Digital Stereo Endstufe Board Modul/ 50W + 50W Dual Kanal Audio Receiver/ Audioempfänger Endverstärker Brett*
  • Die Klangqualität ist sehr gut, wenn Sie dieses Modul verwenden.
  • Mit CSR8635 Bluetooth-Chip, Bluetooth V4.0, hohe Software-Kompatibilität.
  • Leistungsverstärker-Chip: TDA7492 doppelte Kanäle ausreichend Leistung 50W, besser als TDA7492P.
  • DIP-Schalter für mehr Komfort, um Verstärkung Verstärkung einstellen.
  • Mit 5 Tasten für die Einstellung, einfach zu bedienen. Anwendbare Lautsprecherimpedanz: 4/6/8 Ohm (8 Ohm ist die beste).
Bestseller Nr. 4
DSD TECH CC2541 Bluetooth 4.0 BLE Slave-Modul zum UART-Transceiver für Arduino Kompatibel mit iOS
2 Bewertungen
DSD TECH CC2541 Bluetooth 4.0 BLE Slave-Modul zum UART-Transceiver für Arduino Kompatibel mit iOS*
  • Es ist ein bluetooth 4.0 ble Modul mit 6 PIN baseboard für Arduino auch für Ihr DIY drahtloses Projekt. Schnittstellen umfasst VCC, GND, txd, rxd, status, EN
  • Nur Slave-Modus. Kompatibel mit iPhone 4s / 5 / 5s 6 / 6s und Android-Handys 4.3 oder höher. Die empfohlene Test-Software ist: LightBlue
  • Hauptchip ist cc2541F256, hergestellt von TI. Wenn Sie MCU Pro sind, können Sie es durch cc-debugger programmieren.
  • Standardrate: 9600 und Sie können die Baudrate und den Bluetooth-Namen über den Befehl at ändern.
  • Betriebsspannung 3.3V bis 6V. ein Jahr Garantie
Bestseller Nr. 5
Hrph Neue drahtlose Bluetooth 12V MP3 WMA Decoder Board Audio Modul TF USB Radio für Auto
12 Bewertungen
Hrph Neue drahtlose Bluetooth 12V MP3 WMA Decoder Board Audio Modul TF USB Radio für Auto*
  • Mit Bluetooth-Audio-Receiver-Modul, wenn Handy und Bluetooth-Modul passenden Anschluss, die MP3 oder zerstörungsfreien APE-Dateien über Bluetooth an das Produkt der Bluetooth-Empfänger-Modul zu spielen, die sehr dazu beigetragen hat, die Funktion des Produkts und Unterhaltung.
  • Dieses Produkt ist auch wie gewöhnliche MP3-Decoder-Platine, spielen U-Disk oder TF-Karte MP3-Dateien, sowie die Radiosendung. (Dieses Produkt ohne Bluetooth-Anruffunktion, ohne Leistungsverstärker, nur an einen externen Verstärker anschließen kann es verwenden)
  • Stützsignalschalter direkt.Support USB, TF
  • Unterstützung bluetooth (Bluetooth3.0 EDR) (nach gepaart mit Handys können drahtloses Musikspiel realisieren)
  • Stützen Sie USB / TF / Bluetooth / FM / LINE switch.MP3 / WMA, WAV verlustfreier Musik decodierender Span.
Bestseller Nr. 6
KKmoon TPA3116 2 x 50W Drahtloses Bluetooth 4.0 Audioempfänger Brett/ DIY Stereoverstärker Modul DC 8-26V mit Fernsteuerungs
24 Bewertungen
KKmoon TPA3116 2 x 50W Drahtloses Bluetooth 4.0 Audioempfänger Brett/ DIY Stereoverstärker Modul DC 8-26V mit Fernsteuerungs*
  • TPA3116 Leistungsverstärker-Chip, 2 * 50W Stereo-Leistung. Bluetooth 4.0, eine perfekte Bluetooth Audio-Empfänger-Karte für den Einsatz.
  • USB-Schnittstelle / TF-Kartenslot, unterstützt spielen Formate: MP3, WMA, WAV, FLAC. Gespräch über Bluetooth Funktion mit Mikrofon.
  • DC 8-26V Eingangsspannung für Stromversorgung. Der drahtlose Empfangsabstand kann bis zu 15m betragen (abgeschirmte Signale).
  • Ausgestattet mit Wärmeableitung Modul auf der Platine. Mit 5 Knöpfen auf dem Brett für Einstellung, bequemer und einfacher Betrieb.
  • Fernbedienung zum Empfangen und Steuern (Infrarot).
Bestseller Nr. 7
Mpow Bluetooth 4.1 Empfänger audio adapter für stereoanlage Heim HiFi Auto Lautsprecher Musikstreaming-Soundsystem mit 3.5mm Aux Cinch Kabel
747 Bewertungen
Mpow Bluetooth 4.1 Empfänger audio adapter für stereoanlage Heim HiFi Auto Lautsprecher Musikstreaming-Soundsystem mit 3.5mm Aux Cinch Kabel*
  • Bluetooth 4.1 Technologie sorgt für stabileres Signal und einen besseren Klang im Vergleich zu Bluetooth 3.0 /4.0.
  • Verbindung mit zwei Geräte: Es kann mit zwei Bluetooth Geräte gleichzeitig verbinden. Aufgrund der Memoryfunktion wird es automatisch mit dem letzte
  • Es will nach Trennung von Bluetooth für 5 Min automatisch ausschalten, es ist ideal für Heim-und Auto-Audio-System.
  • Batterie mit großer Kapazität. Dieses Gerät unterstützt 15 Betriebsstunden und 500 Stunden im Standby-Modus, wenn es voll aufgeladen ist. Vollaufladung dauert nur 2-3 Stunden.
  • Lieferumfang: Mpow Lebenslange Gewährleistung ,Bluetooth empfänger, Cinch-auf-3,5-mm-Kabel, 3.5mm Audio-Kabel,Netzkabel, Bedienungsanleitung
  • Hinweis: Bitte verwenden Sie den Empfänger nicht, während Sie ihn aufladen.
Bestseller Nr. 8
Aukru HC-05 Wireless-Bluetooth-Host Serial-Transceiver-Modul Slave und Master RS232 mit 6 set kabel für Arduino
25 Bewertungen
Aukru HC-05 Wireless-Bluetooth-Host Serial-Transceiver-Modul Slave und Master RS232 mit 6 set kabel für Arduino*
  • Bluetooth-Modul HC-05 Master-und Slave-Zwei in einem Modul Verwenden Sie die CSR-Mainstream-Bluetooth-Chip, Bluetooth V2.0 Protokoll-Standards Modul Arbeitsspannung 3,3 V
  • 1. Working current: matching for 30 MA, matching the communication for 8 MA 2. Dormancy current: non dormancy
  • 3. Used for GPS navigation system, water and electricity gas meter reading system 4. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment .pay your attention on this : Please do not connect the power supply with the signal pin directly,or it will result in broken
  • mit Computer und Bluetooth Bluetooth-Adapter, PDA, nahtlosen Verbindungstechnik.
  • Hinweis: Diese ist nicht original Arduino product.it ist nur ein Ersatz-Zubehör aus aukru.
AngebotBestseller Nr. 9
KKMOON Auto Musik MP3-Decoder Board Audio-FM Radio-Modul mit Aux in USB-Port TF Card Slot Fernbedienung
9 Bewertungen
KKMOON Auto Musik MP3-Decoder Board Audio-FM Radio-Modul mit Aux in USB-Port TF Card Slot Fernbedienung*
  • Unterstützung MP3-Format Musik-Decodierung.
  • Mit USB-Anschluss, TF-Karten-Slot und Aux in.
  • Radio FM, empfangene Kabel Band zu unterstützen (87,5 MHZ-108.0 MHZ).
  • Fernbedienung zu unterstützen.
  • Digitalanzeige.
Bestseller Nr. 10
KKmoon Micro USB DC 5V Bluetooth Audio Receiver Digitaler AMP Modul Verstärker Board Modul 2 x 3W Leistung Micro USB Schnittstelle 4-8 ohm
54 Bewertungen
KKmoon Micro USB DC 5V Bluetooth Audio Receiver Digitaler AMP Modul Verstärker Board Modul 2 x 3W Leistung Micro USB Schnittstelle 4-8 ohm*
  • Klangqualität ist sehr gut durch die Verwendung dieses Moduls.
  • Drahtlose Bluetooth-audio-Eingang und Max. empfangen von Entfernung beträgt 10m.
  • Dual-Channel von 15W + 15W Ausgangsleistung.Geltenden Lautsprecherimpedanz: 4/6/8/10 Ohm.
  • Max. Entfernung empfangen: 10M;Versorgungsspannung: DC 10-25V
  • PCB-Board Größe: 58 x 38mm/2,3 x 1,5 Zoll

 
Wir zeigen Ihnen, in welchem Shop Sie bluetooth modul kaufen können.

*Letzte Aktualisierung am 28.03.2024.
Es handelt sich hierbei um Affiliate Links und Bewertungen von Amazon / Bilder von der Amazon Product Advertising API

Schreibe einen Kommentar